Maya IV 3D - Japandi stijl
2 st. · 0,5 m²€229,00
Bij grotere aantallen rekenen we projectprijs, al verrekend.
- Minder galm, NRC tot 0,6
- In 15 minuten aan de wand, zonder boren
- 5-year warranty
The Maya 3D is a set of acoustic felt panels featuring a soothing Japandi design. The gentle curves and vertical lines bring balance and serenity to any interior. The durable PET felt absorbs sound and adds a calm, stylish touch to your wall.
The same panel. Two very different walls.
Je hoeft niets uit te zoeken. Hang de vlakken gelijk en de tekening loopt over de naden door.
Elk vlak een andere kant op
The lines stop at the seam. You can see separate sections next to each other.
Everything in the same position
De lijnen lopen over de naden door. Je ziet één tekening.
Maya 3D is gesneden op één raster van 100 millimeter, dus de vlakken sluiten op elkaar aan zolang je ze gelijk hangt. Nagemeten op de snijbestanden: dan loopt ongeveer een zesde van de lijnen dood op een naad, tegen driekwart als je ze door elkaar draait.
Bij twee vlakken zie je het nauwelijks. Vanaf zes wordt het een wand.
This applies within a series. The seven Maya 3D designs are based on the same grid, whereas designs from other series are not.
Try it yourself.
Een vlak is 50 bij 50, dus je kunt het een kwartslag draaien. Bij Maya 3D sluit het aan als alles gelijk hangt.
You hang them however you like. We've made sure everything is just right.
Design your own wall hereA panel is a start.
A wall is made up of about six panels. There are three ways to get there, and you don't have to choose one today.
Doorbouwen kan altijd
Order what you want now and expand later. Within a series, everything follows the same grid, so whatever you order in a year will match what’s already hanging there.
Check out the other " Maya " 3D designsA wall that's already finished
Walls that we have drawn up, along with the drawing and the total price.
View the modular wallsLet us do the math
Tell us the size of your wall and what’s in the room. You’ll receive a price and a design proposal—no quote and no phone call.
Take the decision-making guideNot sure about the color? 7 fabric swatches, €19.99, deducted from your first order. View the sample kit
Signed as one family.
Made in the Netherlands.
Every Maeven pattern is designed by us and is not available anywhere else. Maya is carved in double relief: what is carved out of one panel appears as a raised section on the other. Positive and negative, drawn on the same grid.
Gesneden uit PET-vilt van 40-60% gerecyclede vezels, in twee lagen samen 18 mm dik, met de hand afgewerkt. Geen massaproduct, maar een wand die bewust is ontworpen als onderdeel van je interieur.
Product Specifications
Useful information- Elk ontwerp is een set van twee vlakken van 50x50 cm, samen 50x100 cm
- Dikte van 1,8 cm.
- Circa 500 gram per vlak
Our acoustic panels meet the strict EN-13501 fire class B-s1, d0 standard and are therefore safe to use on both walls and ceilings. Thanks to their sound absorption in the mid- and high-frequency ranges, they are suitable for both stylish interiors and commercial environments, such as offices, restaurants, and waiting rooms.
Our panels are made of PET felt containing 40–60% recycled fibers—a soft, stylish material with a subtle open structure. Thanks to the fine fibers, sound is absorbed not only where the panels are hung but throughout the entire room, allowing you to immediately experience a quieter and more comfortable environment.
The panels are individually wrapped in recycled plastic. The PET felt, plastic, and cardboard box are all recyclable.
Installation without drilling or damaging your wall
Thanks to the integrated adhesive layer, our panels can be installed in minutes—even in rental properties or existing interiors.
Simply remove the protective film and apply the panel directly to the wall or ceiling. Immediately enjoy reduced reverberation and a warmer acoustic experience in the room.
Step-by-step
1. Lightly degrease the wall
2. Remove the film
3. Place the panel at the desired height
4. Press down briefly to ensure a secure bond
Thanks to the strong adhesive layer, the panels will stay taut for years—even in larger wall installations or higher spaces.
Check out our Installation Blog for helpful tips and inspiration.
Maeven Art
Unique acoustic designacoustic art, handmade in our studio
Our name, derived from the meaningful word "Maeve," reflects the soft, mysterious, yet robust character of our products.In real living rooms
Photos of interiors where the panels are already installed.
FAQ
Frequently Asked QuestionsYes, you can vacuum the panels using a soft attachment or a wrung-out cloth. Do not use cleaning products with harsh ingredients; instead, use a mild soap solution.
The sound absorption coefficient reaches NRC 0.6, as measured by TU Delft.
The panels are self-adhesive. They can be installed without tools or drilling. We recommend using a level or a self-leveling spirit level.
The panels can be easily removed using a sticker remover. This will deactivate the adhesive layer. To reattach the panels, it is best to use high-tack adhesive.
No. You can carefully peel off the panels by hand or with a putty knife. In some cases, adhesive residue may remain, but you can remove it with sticker remover without causing any damage. This does depend on the condition of the wall.
The NRC was measured by TU Delft, within the room itself and not directly in front of the panel. That’s the value you should expect at home: an NRC of up to 0.6.
Yes, we ship via parcel post, air freight, or sea freight upon request for an additional fee.
The self-adhesive layer can be applied to any surface, provided the wall has already been primed. It works well on wallpaper, stucco, drywall, and even spackputz. Just make sure that if the surface has a coarse texture, the adhesive doesn’t protrude too far, as this could affect adhesion to the surrounding surface.
Grotere wanden rekenen we op projectprijs
| Bestelbedrag | Projectprijs |
|---|---|
| vanaf € 890 | 5 % |
| vanaf € 1.335 | 7,5 % |
| vanaf € 1.869 | 10 % |
De winkelwagen rekent dit zelf. Je hoeft geen code in te vullen.
Vanaf 25 panelen maken we een offerte op maat.
Maatwerk in kleur, formaat of een eigen patroon loopt via ons atelier. Renders en productinformatie sturen we op aanvraag. Stalen bestel je als staalset, verrekend bij je eerste bestelling.
Zakelijk bij Maeven Art