Our acoustic panels easy to install.

Find the perfect spot in your room to acoustic panels your acoustic panels and create a striking and warm look in your home.

Make sure the wall is clean, dry, and dust-free. This is essential to ensure that the adhesive backing adheres properly to the surface. If necessary, use a damp cloth or a mild cleaner to remove dirt and grease. We recommend running your hand over the surface to check for any bumps and removing them with a scraper or putty knife. 

Probeer eerst een paar combinaties op de vloer. Op deze manier kun je visualiseren hoe de panelen samen zullen staan voordat je ze op de muur aanbrengt.

Decide on the layout of the panels in advance. Do you want a neat pattern or a playful mix of panels? Mark the position of each panel with a pencil or painter’s tape to make sure everything is straight. We’re big fans of a self-leveling laser, but a regular level works just fine.

Draai het paneel voorzichtig om, zodat de achterkant naar boven gericht is. Verwijder voorzichtig de stickerfolie van de achterkant van het kunstpaneel. Doe dit langzaam om te voorkomen dat de wandpaneel beschadigd raakt.

Be sure not to rub your fingers over the adhesive surfaces to maintain their stickiness.

Hold the level against the top of the panel and make sure it hangs straight. Place the adhesive side of the top of the panel diagonally against the wall so that it is aligned at two equal points. Press the adhesive side firmly into place for a few seconds. Check that each panel is securely attached. If necessary, you can roll over the surface with a roller for extra adhesion.