Tafel voor twee, zonder rumoer, akoestische wand van 8 viltpanelen, samen 200 bij 100 cm, boven een ronde eettafel in een eethoekUp close
Tafel voor twee, zonder rumoer, akoestische wand van 8 viltpanelen, samen 200 bij 100 cm, in een kantoorIn an office

Acoustic wall

Tafel voor twee, zonder rumoer | akoestische wand 200x100 cm

Rated 4.82 out of 5 stars 4,82 verified reviews
€712,00

Een prijs voor de hele wand, inclusief btw. Gratis verzending vanaf €199.

  • 4–5 production days
  • 30-day return policy
  • No drilling required

What You'll Get

Scope
8 panels measuring 50 by 50 cm
On the wall
200 x 100 cm
The Recipe
  • 4× Loa I
  • 2× Loa II
  • 2× Loa V

The color scheme of this wall

  • Cognac
  • Deep Green

These colors are part of the wall design. You can order it exactly as shown.

Is this wall available in other colors or a different size?

You open this wall in the " wall studio " exactly as it appears here. There, you change the color of each panel, rotate the panels a quarter turn, and make the wall larger or smaller. What you end up with is your wall.

Open this wall in the wall studio

Math Help

How much do you need?

Please provide the dimensions of your room. You don't need to measure the wall.

m
m
Or choose a room

Between 12 and 20 panels

Your room is 20 m². You'll cover 3 to 5 m² of it with felt.

12 panels

noticeably muted

reverberation The volume drops audibly, and the voices sound softer.

starting at €1,068

20 panels

strongly muted

Even with a hard floor, the room feels calm.

starting at €1,780

Three walls in this area

A rule of thumb in acoustics: 15 to 25 percent of your floor area should be covered with soft material. One panel measures 50 by 50 cm and covers 0.25 m².

4-5 productiedagen · 30 dagen retour · 4,82 ★ geverifieerde reviews

The grid

Within a series, each panel fits onto any other panel, regardless of its orientation

Each line extends from the panel at 10-centimeter intervals, at fixed points along the edge. On all four sides, these points are spaced at equal intervals.

Daardoor sluit binnen een serie elk paneel aan op elk ander. Draai er een een kwartslag, of vervang later een paneel voor een andere kleur. Gedraaid loopt het grootste deel van de lijnen door over de naden; hangt alles in dezelfde stand, dan stopt ongeveer de helft op een naad. Tussen twee series lopen de lijnen niet door; die zet je naast elkaar als eigen vlakken.

About this wall

Een zaal die vol zit klinkt goed, tot hij te goed klinkt. Vanaf een bepaald punt praat iedereen tegen de galm in en is een tafel voor twee geen gesprek meer.

Achter de bank een horizontale band van acht panelen, cognac naast flessengroen. Loa I zet kwartcirkels, Loa II diagonalen en Loa V rechte lijnen. Warm en donker, precies op de hoogte waar stemgeluid blijft hangen.

Elke lijn komt op een vaste maat uit de rand, om de tien centimeter. Elk paneel past daardoor op elk ander, in elke draaiing. Loopt de bank door, dan loopt de band mee.

8 panelen van 50 bij 50 centimeter, samen 200 bij 100. Zelfklevend PET-vilt van 9 millimeter. Klaar in 4-5 productiedagen, 30 dagen retour, wij sturen het label.

Measured by TU Delft

Just how quiet will it really be?

Vilt neemt geluid op in plaats van het terug te kaatsen. Voor ons vilt van 9 mm rekenen wij met een NRC tot 0,6, gemeten door TU Delft.

up to 0.6
NRC value per panel
40-60%
Gerecyclede PET-vezels
9 mm
Felt thickness
15 min
Ophangen van een wand
Sound absorption on a scale from 0 to 1
Maeven 9 mm PET felt up to 0.6
Standard foam panel 0.2
Wooden slats 0.05
Bare concrete wall 0.01
Measured by TU Delft

Materials and Assembly

What You'll Get

9 mm PET felt, containing 40–60% recycled fibers. A soft material with an open structure that absorbs sound not only where the panels are installed but throughout the entire room.

  • Each panel measures 50 x 50 cm
  • Thickness: 9 mm
  • Circa 400 gram per paneel

The panels are self-adhesive. You can hang them without drilling or using any tools. Use a level to align the first row, and the rest will fall into place.

The self-adhesive layer adheres to any surface that has been previously treated with primer: wallpaper, stucco, drywall, and spackputz. If the surface has a coarse texture, it’s a good idea to check that it doesn’t protrude too much.

The panels comply with the EN-13501 fire class B-s1, d0 standard and can therefore be installed on both walls and ceilings. They work just as well in a home as they do in an office, restaurant, or waiting room.

The panels are individually wrapped in recycled plastic. The PET felt, the plastic, and the cardboard box can all be recycled again.

FAQ

Frequently Asked Questions

Yes, you can vacuum the panels using a soft attachment or a wrung-out cloth. Do not use cleaning products with harsh ingredients; instead, use a mild soap solution.

De akoestische waarde loopt op tot NRC 0,6, gemeten door TU Delft.

The panels are self-adhesive. They can be installed without tools or drilling. We recommend using a level or a self-leveling spirit level.

The panels can be easily removed using a sticker remover. This will deactivate the adhesive layer. To reattach the panels, it is best to use high-tack adhesive.

No. You can carefully peel off the panels by hand or with a putty knife. In some cases, adhesive residue may remain, but you can remove it with sticker remover without causing any damage. This does depend on the condition of the wall.

NRC is een maat voor geluidsabsorptie, op een schaal van 0 tot 1. Voor ons vilt van 9 mm rekenen wij met een NRC tot 0,6, gemeten door TU Delft.

Ja. We leveren vanuit Nederland in de hele EU. Gratis verzending vanaf €199. Buiten de EU vanaf €399.

The self-adhesive layer can be applied to any surface, provided the wall has already been primed. It works well on wallpaper, stucco, drywall, and even spackputz. Just make sure that if the surface has a coarse texture, the adhesive doesn’t protrude too far, as this could affect adhesion to the surrounding surface.