Find the perfect spot in your space to mount your acoustic panels and create an eye-catching and warm look in your home.
Step 2
Make sure the wall is clean, dry and dust-free. This is essential to ensure that the adhesive backing adheres well to the surface. If necessary, use a damp cloth or gentle cleaner to remove dirt and grease. We recommend using a flat hand to feel for bulges and remove them with a scraper or putty knife.
Step 3
Try a few combinations on the floor first. This way you can visualize how the panels will look together before sticking them on the wall.
Step 4
Decide on the layout of the panels in advance. Do you want a tight pattern or a playful mix of panels? Mark the position of each panel with pencil or painter's tape to make sure everything is straight. We are fans of a self-leveling laser, but a regular level will do just fine.
Step 5
Carefully turn the panel over so that the back side is facing up. Carefully remove the sticker film from the back of the art panel. Do this slowly to avoid damaging the wall tile.
Be careful not to rub your fingers over the glue surfaces to maintain adhesive strength.
Step 6
Hold the level against the top of the panel and make sure it hangs straight. Place the sticker side of the top of the panel diagonally against the wall so that it is aligned at two equal points. Press the sticker side firmly in place for a few seconds. Check that each panel is properly attached. If necessary, you can go over the surface with a roller for additional adhesion.
Important! Once the panel is pressed on, it cannot be moved because it will not adhere properly.
Ready to change the look over time? You can continually add new panels to the wall, creating a new design each time.
