Our acoustic panels are easy to install.

Find the perfect spot in your room to install your acoustic panels and create a striking and warm atmosphere in your home.

Make sure the wall is clean, dry, and dust-free. This is essential to ensure that the adhesive backing adheres properly to the surface. If necessary, use a damp cloth or a mild cleaner to remove dirt and grease. We recommend running your hand over the surface to check for any bumps and removing them with a scraper or putty knife. 

First, try out a few combinations on the floor. This way, you can get a sense of how the panels will look together before you attach them to the wall.

Decide on the layout of the panels in advance. Do you want a neat pattern or a playful mix of panels? Mark the position of each panel with a pencil or painter’s tape to make sure everything is straight. We’re big fans of a self-leveling laser, but a regular level works just fine.

Carefully flip the panel over so that the back is facing up. Gently peel the adhesive backing off the back of the decorative panel. Do this slowly to avoid damaging the wall tile.

Be sure not to rub your fingers over the adhesive surfaces to maintain their stickiness.

Hold the level against the top of the panel and make sure it hangs straight. Place the adhesive side of the top of the panel diagonally against the wall so that it is aligned at two equal points. Press the adhesive side firmly into place for a few seconds. Check that each panel is securely attached. If necessary, you can roll over the surface with a roller for extra adhesion.