In a living room
In an officeAcoustic wall
Heuvels boven het dressoir | akoestische wand 300x100 cm
4,82
verified reviewsOne price for the entire wall, including VAT. Shipping included on orders of €199 or more.
You can choose to pay in installments at checkout.
- 4–5 production days
- 30-day return policy
- No drilling required
What You'll Get
- Scope
- 12 panelen van 50 bij 50 cm
- On the wall
- 300 x 100 cm
- The Recipe
-
- 5× Loa III
- 3× Loa VIII
- 3× Loa I
- 1× Maya V
The color scheme of this wall
- Beige
- Sage Green
These colors are part of the wall design. You can order it exactly as shown.
We built this wall. You can knock it down.
In the " wall studio ," it's set up just as it hangs here. A different color for each panel, rotated 90 degrees, larger or smaller. Within a series, each panel fits together with every other one, so it's impossible to put them in the wrong order.
Open this wall in the wall studioMath Help
How much do you need?
Please provide the dimensions of your room. You don't need to measure the wall.
Between 12 and 20 panels
Your room is 20 m². You'll cover 3 to 5 m² of it with felt.
12 panels
noticeably muted
reverberation The volume drops audibly, and the voices sound softer.
starting at €1,068
20 panels
strongly muted
Even with a hard floor, the room feels calm.
starting at €1,780
Three walls in this area
There are no ready-made walls in this range. These are the closest match. You can add individual panels to them.
A rule of thumb in acoustics: 15 to 25 percent of your floor area should be covered with soft material. One panel measures 50 by 50 cm and covers 0.25 m².
4–5 business days · 30-day return policy · 4.82 ★ verified reviews
The grid
Within a series, each panel fits onto any other panel, regardless of its orientation
Each line extends from the panel at 10-centimeter intervals, at fixed points along the edge. On all four sides, these points are spaced at equal intervals.
As a result, each panel in a series aligns with every other panel. Rotate one a quarter turn, or replace a panel later with a different color. When rotated, most of the lines continue across the seams; if everything is hung in the same orientation, about half of the lines end at a seam. The lines do not continue between two series; you place those side by side as separate sections.
About this wall
Boven het dressoir in de hal hangt meestal een spiegel of niets. Hier loopt een landschap van drie meter breed.
Twaalf panelen uit Loa, met één Maya ertussen, in Beige en Sage Green. De lijnen deinen als glooiingen achter elkaar. Vijf keer dezelfde heuvel geeft de wand rust, de rest zorgt dat het nergens een patroon wordt.
Waar je de heuvels laat oplopen bepaal je zelf. Elke lijn verlaat het paneel op een vast punt langs de rand, in stappen van tien centimeter. Daarom past elk paneel op elk ander, ook een kwartslag gedraaid, en kun je later een paneel omwisselen.
12 panelen van 50 bij 50 cm, samen 300 bij 100 cm. Zelfklevend PET-vilt van 9 mm. Klaar in 4-5 productiedagen, 30 dagen retour.
Just how quiet will it really be?
Felt absorbs sound rather than reflecting it. For our 9-mm felt, we use an NRC value of up to 0.6, as measured by TU Delft.
Materials and Assembly
What You'll Get9 mm PET felt, containing 40–60% recycled fibers. A soft material with an open structure that absorbs sound not only where the panels are installed but throughout the entire room.
- Each panel measures 50 x 50 cm
- Thickness: 9 mm
- Approximately 400 grams per panel
The panels are self-adhesive. You can hang them without drilling or using any tools. Use a level to align the first row, and the rest will fall into place.
The self-adhesive layer adheres to any surface that has been previously treated with primer: wallpaper, stucco, drywall, and spackputz. If the surface has a coarse texture, it’s a good idea to check that it doesn’t protrude too much.
The panels comply with the EN-13501 fire class B-s1, d0 standard and can therefore be installed on both walls and ceilings. They work just as well in a home as they do in an office, restaurant, or waiting room.
The panels are individually wrapped in recycled plastic. The PET felt, the plastic, and the cardboard box can all be recycled again.
FAQ
Frequently Asked QuestionsYes, you can vacuum the panels using a soft attachment or a wrung-out cloth. Do not use cleaning products with harsh ingredients; instead, use a mild soap solution.
The sound absorption coefficient reaches NRC 0.6, as measured by TU Delft.
The panels are self-adhesive. They can be installed without tools or drilling. We recommend using a level or a self-leveling spirit level.
The panels can be easily removed using a sticker remover. This will deactivate the adhesive layer. To reattach the panels, it is best to use high-tack adhesive.
No. You can carefully peel off the panels by hand or with a putty knife. In some cases, adhesive residue may remain, but you can remove it with sticker remover without causing any damage. This does depend on the condition of the wall.
NRC is a measure of sound absorption on a scale from 0 to 1. For our 9-mm felt, we use an NRC value of up to 0.6, as measured by TU Delft.
Yes. We ship from the Netherlands throughout the EU. Shipping is included on orders of €199 or more. Outside the EU, shipping is included on orders of €399 or more.
The self-adhesive layer can be applied to any surface, provided the wall has already been primed. It works well on wallpaper, stucco, drywall, and even spackputz. Just make sure that if the surface has a coarse texture, the adhesive doesn’t protrude too far, as this could affect adhesion to the surrounding surface.